Hello, all-
Looking for a used or non-working clock for a '49 or '50 Plymouth. I need some spare parts--specifically, I need the stem that sets the clock. I have a perfectly good clock that has a broken stem.
Regards--
Scott
1949 or 1950 Clock & Parts
Moderator: Specialdeluxe
-
- Moderator
- Posts: 879
- Joined: Mon Nov 4th, 2002 3:59
- Plymouth: No_Plymouth
- Location: Northern Colorado
Re: 1949 or 1950 Clock & Parts
Scott .... I'll check. I have two or three clocks.
-
- Deluxe Member
- Posts: 121
- Joined: Sat Mar 4th, 2006 9:01
- Plymouth: No_Plymouth
- Location: Holland--Ohio
- Contact:
Re: 1949 or 1950 Clock & Parts
Thanks, John-
I was able to trade some spare parts for some clock parts just about a week ago.
However, I can always use spares if have a junk clock.
Thanks
Scott
I was able to trade some spare parts for some clock parts just about a week ago.
However, I can always use spares if have a junk clock.
Thanks
Scott
D. Scott Weidman
http://www.freewebs.com/1949convertible/index.htm
http://www.freewebs.com/1949convertible/index.htm
-
- Moderator
- Posts: 879
- Joined: Mon Nov 4th, 2002 3:59
- Plymouth: No_Plymouth
- Location: Northern Colorado
Re: 1949 or 1950 Clock & Parts
Sounds good .... just know that I have a couple clocks that are "ok" but untested ... so they look decent externally and I suspect have lots of good parts. Hope the "new" convert is coming along well ....
-
- Deluxe Member
- Posts: 121
- Joined: Sat Mar 4th, 2006 9:01
- Plymouth: No_Plymouth
- Location: Holland--Ohio
- Contact:
Re: 1949 or 1950 Clock & Parts
Thanks, again. If you wouldn't mind scavaging one of the stems from the clock and just dropping it in an envelope, that would be great. Those things seem to break often. At least in my case anyway.
Anything you need we could possibly trade for the stem?
I believe the "new" convertible has been sold. A fellow in Texas has committed to buying, just waiting for the $$.
Anything you need we could possibly trade for the stem?
I believe the "new" convertible has been sold. A fellow in Texas has committed to buying, just waiting for the $$.
D. Scott Weidman
http://www.freewebs.com/1949convertible/index.htm
http://www.freewebs.com/1949convertible/index.htm
-
- Moderator
- Posts: 879
- Joined: Mon Nov 4th, 2002 3:59
- Plymouth: No_Plymouth
- Location: Northern Colorado
Re: 1949 or 1950 Clock & Parts
Yes, will do .... glad you found someone with $$$ for the convert ... I'm way jealous but also pragmatic. I think I'll be living with Club Coupes .... one could do worse and not have any ....
Let you know in a week or so ....
John
Let you know in a week or so ....
John
-
- Deluxe Member
- Posts: 121
- Joined: Sat Mar 4th, 2006 9:01
- Plymouth: No_Plymouth
- Location: Holland--Ohio
- Contact:
Re: 1949 or 1950 Clock & Parts
Thanks again John. Received deposit today on the convertible. Really hate to see
It go, but that was my intention from the beginning. But I like your attitude, coupes are enjoyable as well. I was just very fortunate to find the cars at affordable prices.
Take care
It go, but that was my intention from the beginning. But I like your attitude, coupes are enjoyable as well. I was just very fortunate to find the cars at affordable prices.
Take care
D. Scott Weidman
http://www.freewebs.com/1949convertible/index.htm
http://www.freewebs.com/1949convertible/index.htm
Who is online
Users browsing this forum: No registered users and 1 guest